Select a different country or region to see content for your location.
United States
20:24:40 GMT+0000 (Coordinated Universal Time)
JK0S030
Tapered roller bearing
Tapered roller bearings JK0S, integral tapered roller bearings, lip seal on one side, diameter series 0
Preferred product
Product information
Main Dimensions & Performance Data
| d | 30 mm | Bore diameter |
| D | 55 mm | Outside diameter |
| B | 19 mm | Width, inner ring |
| C | 18,5 mm | Width, outer ring |
| Cr | 38.500 N | Basic dynamic load rating, radial |
| C0r | 46.500 N | Basic static load rating, radial |
| Cur | 5.300 N | Fatigue load limit, radial |
| nG | 6.100 1/min | Limiting speed |
| FBR | 15.700 N | Load carrying capacity of snap ring connection |
7.700 N | Maximum axial clamping force | |
| ≈m | 185,3 g | Weight |
Mounting dimensions
| da max | 35 mm | Maximum diameter of shaft shoulder |
| db min | 36 mm | Minimum diameter of shaft shoulder |
| ra max | 1 mm | Maximum fillet radius of shaft |
| Dn | 56,5 mm | Groove diameter at housing |
| ΔDn | 0,19 mm | Upper limit deviation |
Dimensions
| r1, 2 min | 1 mm | Minimum chamfer dimension of inner ring back face |
| D1 | 51,4 mm | Diameter of groove |
| m/2 | 0,75 mm | Width of groove |
| a | 15 mm | Distance between the apexes of the pressure cones |
| d1 | 43,6 mm | Guidance rib diameter of inner ring |
| u | 0,02 mm | Stand out inner to outer ring |
| Δu | 0,05 mm | Upper limit deviation |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 110 °C | Operating temperature max. |
Calculation factors
| e | 0,43 | Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y |
| Y | 1,4 | Dynamic axial load factor |
| Y0 | 0,77 | Static axial load factor |
Additional information
BR55 | Snap ring |
