Technical information on Yoke type ball bearing track rollers, stud type ball bearing track rollers

Ball bearing track rollers:

  • are ready-to-fit, single or double row rolling bearings based on deep groove or angular contact ball bearings
  • are supplied with or without a stud (designs without a stud are mounted on shafts or studs)
  • have particularly thick-walled outer rings with a crowned or cylindrical outside surface
  • can support high radial loads
  • tolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impacts
  • are sealed on both sides
  • are not mounted in a housing bore, but are supported on a flat mating track
  • can be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction

Double row stud type track roller supported on a flat mating track

 
Mating track

Want to find out more about our Ball bearing track rollers?

You will find detailed information in our knowledge center:

    Contacto Impresos protección de Datos
    Políticas de cookies Condiciones de uso Cambiar el país
Schaeffler Iberia, S.L.U.
Calle Fomento 2 – P.I.Pont Reixat
Sant Just Desvern – Barcelona, 08960

© Schaeffler Iberia, S.L.U.